Main Features

• Quad Core / Dual Core XeonlŽ processor SBC.
  
• Intel 5000P embedded chipset with longevity support.
  
• Robust mechanism design for enhanced product reliability.
  
• Up to 8 GB ECC/Register FB-DIMM DDR 2 memory
  
• Dual PCI Express Gigabit Ethernet for high networking bandwidth
  
• Four USB 2.0 directly output from bracket to save the cabling cost.
  
  SPECIFICATIONS:
• CPU Support
  Support Dual-Core IntelŽ XeonŽ processor 5100 series and Quad- Core IntelŽ XeonŽ Processor 5300 series (80W)
  Intel Embedded Processor List (IntelŽ Longevity CPU): Dual Core IntelŽ XeonŽ Processor (5130&5140)
  Dual Core IntelŽ XeonŽ Processor LV (5128,5138,5148)
  1066/1333 MHz FSB support
  
• Main Memory
  4 x 240-pin four channel DDR 2 FB-DIMM Support ECC / Register DDR2 memory up to 8GB
• Chipset
  IntelŽ 5000P memory controller Hub
  IntelŽ 6321ESB I/O controller Hub
  
• BIOS
  AMI BIOS
  Plug & Play support
  8M-bit flash ROM
  Support Soft off, Wake on LAN, Power On by PS2 Keyboard Function Key, RTC alarm Power On
  Power on after power failure
  
• On Board LAN
  2 x IntelŽ 82573L PCI Express Gigabit Ethernet Support Boot From LAN (PXE) Support Wake On LAN (When 5Vsb power available) 2 x RJ45 with LED
• Display
  ATI RS1000 PCI graphic Controller
  32MB DDR2 SDRAM VGA Memory
  1 x DB15 VGA port
  
• I/O Interface
  USB 2.0: 4 ports through I/O bracket
  USB 2.0: 2 ports, Serial port: 2 ports, with 2x5 box-header (2.0mm) support RS-232 only
  Parallel port: 1 port , with 2x13 box-header (2.0mm), Bi-directional, EPP/ECP
  PS/2: 1 x Mini-Din Keyboard/Mouse
  GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface
  FAN: 2 x 4-pin FAN connectors (for CPU coolers )
  1 x on board buzzer
  1 x 2-pin power on switch
  1 x 5-pin header for key lock
  1 x 2-pin headers for power LED
  1 x 2-pin headers for HDD LED
  
• Storage
  SATA: 2 ports, support RAID 0,1 through Backplane
  IDE: 1 x 40-pin IDE connector, support Ultra ATA 33/66/100
  1 x 2-pin JST (2.5mm) power connector for DOM (Disk On Module)
  
• Watchdog Timer
  Watchdog Timer is programmable by software from 0 to 255 seconds(Tolerance 15% under room temperature 25°C)
  
• On-board RTC
  On-chip RTC with battery backup
  1 x External Li-Lon battery
  
• Dimensions
  PICMG 1.3 form factor
  338.58 mm (L) x 122 mm (W) (13.3” x 4.8”)
  
• Environment
  Operating Temperature: 0°C ~ 60°C (for Board Level Only)
  Storage Temperature: -20°C to 85°C
  Relative humidity: Operating: 10%~90% (non- condensing)
  Non-Operating: 5~95% (non- condensing)
  
• Certifications
  CE approval
  FCC Class A
  

2013 RyAim International Corp. All rights reserved.